Reverse Travel and Sag Indicator 2.0

- The "Travel and Sag INDICATOR" is a measuring instrument for racers and suspension tuners - For easy set up of steel spring dampers - The INDICATOR is mounted on the side and by means of a scale one can easily read off how much travel was needed when driving - Ideal for suspension "setup", to determine the correct spring stiffness, sag and preload. - It's a tuning tool to find out if the spring rate is correct and how the compression / damping is adjusted - To optimise your setup for racing or your new bike - Weight: 40 g - Material: aluminium / plastic - Scope of delivery: 1x spring plate attachment 1x holder for the indicator 1x telescopic sleeve 1x telescopic scale 1x cable tie 1x Piggyback sticker 1x serrated lock washer M5 1x M5 screw 1x O-ring Attention!!! The Travel & SAG Indicator 2.0 is only compatible with springs that do not exceed a length of 180 mm, whether compressed or uncompressed. If this is the case, we recommend version 1 (item no. 933000964) with attachment to the expansion tank. If this is not possible due to the design, please contact our customer support and we will find an individual solution.